How Difficult Is It to Replace a Car Stereo?

There’s nothing inherently difficult about putting a new head unit your own car or truck, but the question of exactly how hard it is depends on a whole bunch of different factors.

Some cars are just easier to work on than others, and the relative difficulty level will also depend on things like your own personal experience and how easily you pick up new things.

The bottom line is that while anyone can technically install their own head unit, whether or not it's a good idea is an entirely different question.

If you're thinking about installing your own car stereo, we'll cover all of the potential pitfalls, provide some useful solutions, and even point you to a hands-on walk-through so you can see what the process looks like from start to finish.

car stereo install
Brad Goodell / Getty Images

The Biggest Pitfalls of DIY Head Unit Installation

There are three main issues that you can run afoul of while replacing your own head unit:

  • Difficult trim and dash components: Very few car radios pop out of the dash without at least a little finagling. Some are more difficult than others, and you may end up breaking delicate trim components if you aren't very careful.
  • Fit and mounting issues with the new head unit: If you buy a head unit that's the wrong size, it won't fit. That's why it's so important to make sure you buy the right size head unit, and also pick up the right mounting kit if one is available.
  • Wiring confusion: There are some fairly standard wiring color combinations, but you can still run into situations where it isn't clear what is suppose to connect to where. This is especially true if your radio has already been replaced in the past.

Dealing with Trim and Dash Components

First off, let's take a look at the problems you can run into with trim and dash components. This is the very first stumbling block that you’re likely to hit, although it is more of an issue in some cars than others.

If you’re lucky enough to own a car where very few trim, center console, or dash components interfere with removing the head unit, then you can breathe easy. If you aren’t that lucky, then this is something you’ll want to take a good, hard look at before you commit to replacing your head unit.

Other than just looking at your dash, you can get an idea of what you’re up against by searching the Internet for an “exploded” diagram of your dash or center console.

These diagrams can seem confusing if you’re not used to reading them, but if you can find one that matches the make, model and year of your car, you’ll be able to see exactly which trim pieces have to be removed to gain access to the head unit.

If you choose to proceed, it’s important to remember to work slowly and methodically and to never force anything.

Some trim pieces and dash elements are bolted in place, while others simply snap in, so if something doesn’t pop out easily, make sure you’ve checked thoroughly for screws and bolts before you break something.

Check out our guide to installing a car radio for pictures that show how trim pieces can get in the way and have to be removed.

Fixing Fit and Mounting Issues

Potential issues that you can run up against in terms of fit and mounting include replacement head units that are the wrong size, original head units that aren't shaped normally, and trim pieces that don't line up correctly after you've finished the job.

Before you buy a new head unit, and especially before you try to install it, it’s important to make sure that the new head unit will fit.

The easiest way to make sure that you buy a replacement head unit that will fit in your car is to look for one that conforms to the same size specification as the original.

For instance, if your original head unit is double DIN, you can typically replace it with an aftermarket double DIN head unit without any issues.

If you want to replace a double DIN head unit with a single DIN aftermarket unit, you’ll have to obtain an appropriate car stereo mounting kit.

Of course, nothing is ever quite that simple. If your car has a nonconforming head unit, then you’ll have to find a dash kit that’s specifically designed for your vehicle. This makes the job a little more complicated, but it’s essentially still just a matter of removing the old head unit, installing the dash kit and then installing the new head unit into the kit.

Wiring a New Head Unit

Wiring in a new head unit is often the most daunting part of the process, which is especially true if you have no prior experience with electronics or wiring. If that’s the case, then you’ll find the job much easier if you use a wiring harness that’s designed specifically for your vehicle and head unit.

These wiring harness adapters make the installation process plug and play in that you simply plug one end into your factory harness, plug the other end into your new head unit, and you’re good to go.

If a wiring harness adapter isn’t available, or you’re fairly comfortable with wiring, then connecting your own wires is actually pretty easy. You will want to start by looking for a wiring diagram for your vehicle that shows what each wire is for.

If that isn’t available, then you can determine what your OEM car stereo wires are for with a few basic tools. Your new head unit should come with a wiring diagram, or even have a legend printed on it, but if it doesn’t, most aftermarket head units use a single wire color scheme.

Tools for Installing a New Head Unit

Installing a head unit requires a few basic tools, like:

  • Screwdrivers
  • Wrenches or sockets
  • Pry tool

If you’re going to do your own wiring, including self-identification of the OEM wires, instead of using a harness, you’ll also need:

  • Multimeter
  • 1.5V battery

You'll also need one of the following methods of connecting wires together, including the associated accessories and materials:

  • Soldering supplies
    • Soldering iron
    • Solder
    • Heat shrink
  • Wire crimping supplies​
    • Butt connectors
    • Wire crimper

Once you have all of your tools together, you're ready to start the installation process.

Make sure to check out our tutorial, linked earlier in this article, or search for a walk-through video that shows how your exact vehicle comes apart and goes back together. You can typically find that type of video on YouTube, although you'll have better luck if your vehicle is a popular model.

Was this page helpful?